OTHER

1

    Sometimes hard drives Seagate EC2 or 7200.12 -can not connect to the terminal because it's blocked.And unlock the conventional methods was notobtained. You can use the connection to the processorand the method described here and get additional features not available in the PC3000 and HRT.

 

 

2

 

In recent years, often bringing in hard drive WD WD10TMVV for data recovery using the SATA bridge controller chip INIC-1607E . About how to connect the hard drive and how to decrypt the data without this chip is written below. And how to use the composite decryption while copying the data without using the chip.
 
The hard disk has a normal SATA interface processor 88I9045 And bridge INIC-1607E . In order to work with himdirectly, and the process hangs and use the additional features make the connection SATA directly to the interface as shown in the figure.

 

CPU COUNT PIN 128. Connect pin from cpu to sata interface

It should be noted that it is necessary to make the wires as short as possible and unsolder capacity thatconnect the processor ( C13, C18, C31, C33 ) to the bridge in 1607E !!!

 

CPU PIN SATA PIN DESCRIPTION INTERFACE DESCRIPTION DATA STREAM 
103 6 RECEIVE DATA B+
104 5 RECEIVE DATA B-
106 3 TRANSMIT DATA A-
107 2 TRANSMIT DATA A+
       
Connecting the power hard drive connect a +5 V and 0. After it connects to a computer and copy the data. Use our tools orPC3000 OR HRT.
Further information for our partners:
For the background to decrypt download our software and instructions for decoding the image or the use ofdecryption on the fly. It is necessary to not read all the way data and view information in the process ofcopying ..

 

MANUAL FOR JTAG CONNECTION AND SATA CONNECTION - 

DECRIPTION + UTIL AND HOW USED IN CASE WITH PC3000  -

Reed this - http://csrc.nist.gov/groups/STM/cavp/documents/aes/aesval.html

MANUAL FOR BRIDGES SEE BELOW IN TABLE